Home
Cart
Custom content
<p>This is custom content</p>

Home

Filter By

Categories

Categories

Price

Price

  • $31.00 - $167.00

Brand

Brand

Material

Material

Length

Length

Series

Series

Pressure

Pressure

Inlet

Inlet

Nozzle size

Nozzle size

Output

Output

Contents container

Contents container

Active filters

  • Categories: Foam Equipment & Accessories
  • Categories: Lances
Suttner ST-54 Stainless Steel 38" Molded Handle Twin Lance
Suttner

Suttner ST-54 Stainless Steel 38" Molded Handle...

$86.58
Availability: 2 In Stock

Suttner ST-54 Stainless Steel 38" Molded Handle,Twin lance. 15 degrees bended input 1/4"MPT, 2 outlets 1/4"F with nozzle ST-10 protector and low pressure nozzle. High pressure nozzle is NOT included. Made in Germany. For use when high and low pressures are needed.

For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure. Lance 15° bended with molded handle, valve ST-54 aside, nozzle protector ST-10 with low pressure nozzle & 1/4" F thread

ST-60.1 Suttner foam injector with metering valve, suction hose and filter, couplings ST-45-250 KW
Suttner

ST-60.1 Suttner foam injector with metering...

$126.61
Availability: 1 In Stock

ST-60.1 Downstream Suttner foam injector with chemical metering valve, suction hose and ST-31 chemical strainer, quick couplings nickel/zinc plated brass ST-45-250 KEW, Nilfisk-Alto. Mixing of chemicals approx. 0-11.5%.Metering valve hose tail 1/4. Suction hose 39" long.Injector with dosage ST-61. Orifice size 1.6 mm.

Maximum pressure: 3625 psi
Minimum flow rate: 1.6 GPM
Maximum flow rate: 15.2 GPM
Temperature: 140°F
Housing: forged brass
Nozzle: Stainless steel
Input coupling: ST-45-250 KW
Output connector: ST-45-250 KW
Suction hose lenght: 39"

Suttner ST-85 Stainless Steel 38" Molded Handle Push & Pull Lance
Suttner

Suttner ST-85 Stainless Steel 38" Molded Handle...

$166.56
Availability: 1 In Stock

Suttner ST-85 Stainless Steel 38" molded handle Push and Pull lance. Input 1/4"FPT, outlets 1/4"FPT with nozzle ST-10 protector. High pressure nozzle and side handle is NOT included. Made in Germany.

Especially designed for cleaning of places which are difficult to access such as containers, gutters, roofs, underneath fender walls, under vehicles, and heavy equipment. Lance variable adjustment of spraying angle from 20° to 140°. ST-85 Push & Pull lance with nozzle protector ST-10 without high pressure nozzle.

ST-73.1 Foam injector lance with regulator and bottle. 1/4"
Suttner

ST-73.1 Foam injector lance with regulator and...

$79.05
Availability: 2 In Stock

Our easyfoamer ST-73.1 realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result. Nozzle size 1.25.

completely stainless steel and

non-corrosive injector unit

the highest grade of chemical resistance

5 defined dosing positions

0.265 gal bottle

vertical or horizontal spray pattern

patent pending

Pressure max. 4350 psi

Temperature  176 F

PA LS3-2 Foam Injector With Tank
PA

PA LS3-2 Foam Injector With Tank

$80.36
Availability: 2 In Stock

Foam injector lance with regulator and bottle. The new LS3, now with vertical nozzle. Nozzle size 1.25.

Inlet 1/4 Bsp F
Pressure 160 bar - 16 MPa - 2300 psi
Permissible Pressure 180 bar - 18 MPa - 2600 psi
Rated Flow Rate 12 l/min - 3.2 USGpm
Rated Temperature 60 °C - 140 °F
Tank 1 L - 0.264 USg

Foam Lance ST-72 (With Air Injector) YELLOW
Suttner

Foam Lance ST-72 (With Air Injector) YELLOW

$140.47
Availability: 1 In Stock

Suttner ST-72 Stainless Steel 24" FOAM LANCE, 2.9-3.96 GPM, 2.3 ORIFICE YELLOW COLLAR.

In conjunction with a spray gun and upstream or downstream injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction ideal for food grade applications.

FEATURES:

-Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream.

-Wet foam allows more efficient use of chemical

-More durable than conventional foamers

-Color orifice indicator on handle end

-A foam injector is required

SPECIFICATION:

-Orifice: 2.3 Yellow Dot

-Flow Rates: 2.90 to 3.96 GPM

-Input: 1/4" FPT

-Length: 24"

-Temperature: 300 F maximum, 41 F minimum

-Pressure: 900 PSI maximum

This website uses cookies to ensure you get the best experience on our website