Home
Cart
Custom content
<p>This is custom content</p>

Home

Active filters

  • Brand: Suttner
  • Inlet: 1/4" F
  • Inlet: 1/4" F NPT
  • Inlet: 1/4" MPT
  • Inlet: 3/8" FNPT
ST-10 Nozzle Protector 1/8"F SS GREY/BLACK
Suttner

ST-10 Nozzle Protector 1/8"F SS GREY/BLACK

$15.35
Availability: 3 In Stock

ST-10 is 2 component nozzle protector. Made out of hard plastic and soft edge protecting sensitive surfaces against damage . Stainless steel body. The nozzle protector suitable for cold and hot water applications in the car wash, agriculture, food industry. ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time. Suitable for nozzles 1/8" M NPT.

Maximum pressure: 7250 psi
Rated temperature: 300°F
Input: 1/4 F NPT
Outlet: 1/8 F NPT
Housing: Stainless Steel
Protection material: Hard plastic/Soft edge

Socket 1/4"F With Nozzle Protector
Suttner

Socket 1/4"F With Nozzle Protector

$4.66
Availability: 5 In Stock

Nozzle protector. It's made out of soft Rubber which protects sensitive surfaces against damage. It also has a zinc-plated body. The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture. Suitable for nozzles 1/4" M NPT.

Maximum pressure: 5800 psi
Rated temperature: 300°F
Input: 1/4 F NPT
Outlet: 1/4 F NPT
Housing: Zinc-plated steel
Protection material: Rubber

ST-10 Nozzle Protector 1/4"F ZP Grey/Black
Suttner

ST-10 Nozzle Protector 1/4"F ZP Grey/Black

$4.66
Availability: 3 In Stock

ST-10 is a 2 component nozzle protector. It's made out of hard plastic and has soft edge which protects sensitive surfaces against damage. It also has a Zinc-plated steel body. The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture, and food industry. ST-10 is unimpeachable, it protects your nozzles and preserves the surfaces to be cleaned at the same time. Suitable for nozzles 1/4" M NPT.

Maximum pressure: 5800 psi
Rated temperature: 300°F
Input: 1/4 F NPT
Outlet: 1/4 F NPT
Housing: Zinc-plated steel
Protection material: Hard plastic/Soft edge

ST-10 Nozzle Protector 1/4"F SS Black/Grey
Suttner

ST-10 Nozzle Protector 1/4"F SS Black/Grey

$10.21
Availability: 5 In Stock

ST-10 is a 2 component nozzle protector. It's made out of hard plastic and has soft edge which protects sensitive surfaces against damage. It also has a Stainless steel body. The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture, and food industry. ST-10 is unimpeachable, it protects your nozzles and preserves the surfaces to be cleaned at the same time. Suitable for nozzles 1/4" M NPT.

Maximum pressure: 7250 psi
Rated temperature: 300°F
Input: 1/4 F NPT
Outlet: 1/4 F NPT
Housing: Stainless Steel
Protection material: Hard plastic/Soft edge

Suttner ST-54 Stainless Steel 38" Molded Handle Twin Lance
Suttner

Suttner ST-54 Stainless Steel 38" Molded Handle...

$86.58
Availability: 2 In Stock

Suttner ST-54 Stainless Steel 38" Molded Handle,Twin lance. 15 degrees bended input 1/4"MPT, 2 outlets 1/4"F with nozzle ST-10 protector and low pressure nozzle. High pressure nozzle is NOT included. Made in Germany. For use when high and low pressures are needed.

For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure. Lance 15° bended with molded handle, valve ST-54 aside, nozzle protector ST-10 with low pressure nozzle & 1/4" F thread

ST-49 Non-Rotating Sewer Cleaning Grease Ball Nozzle (Female 1/4 8x06R)
Suttner

ST-49 Non-Rotating Sewer Cleaning Grease Ball...

$55.22
Availability: 3 In Stock

ST-49 non-rotating sewer cleaning Grease ball nozzle. Female 1/4 8x06R. Ss hardened. Made in Germany

The Grease ball features 8 rear jets (0.6 mm) for extreme thrust and highest wall coverage of the pipe. Designed for the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes too. Completely spherical shape. Nozzle drilling as stepped bore for best protection against mechanical impact. Good for 2”-6” inch lines.

ST-49 Non-rotating Sewer Cleaning Root Ram Nozzle (Nozzle size 06, Female 1/4)
Suttner

ST-49 Non-rotating Sewer Cleaning Root Ram...

$69.55
Availability: 3 In Stock

ST-49 non- rotating sewer cleaning root ram nozzle. Nozzle size 06. Female 1/4. Material Ss hardened. Made in Germany

The Root ram is equipped with 3 rear jets (30°) for maximum thrust and 3 additional nozzles (45°) right behind its nose for better cleaning results and wall coverage. The nozzle has proven to be ideal on root chokes. Good for 2"-6" lines.

Suttner ST-2600 Pressure Washer Trigger Gun (1/4" F Outlet, 3/8" F Inlet)
  • -30%
Suttner

Suttner ST-2600 Pressure Washer Trigger Gun...

$51.73 $36.21 -30%
Availability: 3 In Stock

Suttner ST-2600 Pressure Washer Trigger Gun. Patented LTF technology. Inlet 3/8 F, Outlet 1/4 F

Professional, heavy duty, German made, Suttner ST-2600 with patented LTF technology (Low trigger force) pressure washer trigger gun. It comes with a 1/4” female outlet and 3/8 F inlet. Made in Germany.

Wash Gun ST-2300 3/8"-1/4"F (NO SWIVEL)
  • -30%
Suttner

Wash Gun ST-2300 3/8"-1/4"F (NO SWIVEL)

$45.23 $31.66 -30%
Availability: 3 In Stock

Suttner ST-2300 Professional Pressure Washer Trigger Gun

New Professional, heavy duty, German made, Suttner ST-2300 pressure washer trigger gun. Comes with a 1/4” Female outlet and a heavy duty 3/8’’ Female inlet

SPECIFICATION:

-Maximum Pressure: 4500Psi/ 310 Bar

-Maximum Flow: 12 gal/min/ 45 Ltr/min

-Maximum Temperature: 300F/ 150C Degrees

-3/8" FNPT Inlet

-1/4" FNPT Outlet

-Safety Lock Feature

-Forged brass housing for maximum strength

-Handle constructed of impact resistant plastic

This website uses cookies to ensure you get the best experience on our website