There are 7 products.
Active filters
Our easyfoamer ST-73.1 realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result. Nozzle size 1.25.
completely stainless steel and
non-corrosive injector unit
the highest grade of chemical resistance
5 defined dosing positions
0.265 gal bottle
vertical or horizontal spray pattern
patent pending
Pressure max. 4350 psi
Temperature 176 F
ST-60.1 Downstream Suttner foam injector with chemical metering valve, suction hose and ST-31 chemical strainer, quick couplings nickel/zinc plated brass ST-45-250 KEW, Nilfisk-Alto. Mixing of chemicals approx. 0-11.5%.Metering valve hose tail 1/4. Suction hose 39" long.Injector with dosage ST-61. Orifice size 1.6 mm.
Maximum pressure: 3625 psi
Minimum flow rate: 1.6 GPM
Maximum flow rate: 15.2 GPM
Temperature: 140°F
Housing: forged brass
Nozzle: Stainless steel
Input coupling: ST-45-250 KW
Output connector: ST-45-250 KW
Suction hose lenght: 39"
Suttner ST-60.1 Foam Injector for use with Suttner ST-72 foam lances. Injector without metering valve, no suction hose, no filter.
Can also be used as low pressure injector.
Minininum 2 Bar
Maximum 2 Bar
Output of Approx. 150l/h
Mixing of chemicals approximately 0 - 11.5%
Foam injector lance with regulator and bottle. The new LS3, now with vertical nozzle. Nozzle size 1.25.
Inlet 1/4 Bsp F
Pressure 160 bar - 16 MPa - 2300 psi
Permissible Pressure 180 bar - 18 MPa - 2600 psi
Rated Flow Rate 12 l/min - 3.2 USGpm
Rated Temperature 60 °C - 140 °F
Tank 1 L - 0.264 USg
Suitable for all Suttner injectors ST-60, ST-60.1, ST-62. Hose tail 6mm chemical check valve.
Maximum Pressure 3625 PSI / 250 Bar
Maximum Temperature 140° F / 60° C
Material Brass
Hose Tail 6mm/0.24 in
Suttner ST 73.1 High flow foam injector lance with large 64 oz. Bottle, Stainless steel Integrated Chemical Injector size 1.8, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Atuomotive/Fleet and institutional applications!
The ST-73 foam lance is fitted with an interchangeable injector nozzle and a foaming pad. By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted.
Pressure 1000 - 3625 PSI
Flow Rate 3.4 - up to 8 GPM
Max Temp 175° F
Inlet 1/4" Female
Bottle 64 oz.
Weight 1.20 lb
Metering valve, regular kit for ST-60.1 foam injector. Hose tail 6mm. Made in Germany. Suitable for all Suttner injectors ST-60, ST-60.1, ST-62.
Maximum Pressure 3625 PSI / 250 Bar
Maximum Temperature 140° F
Material Plastic
Hose tail 6mm/0.24 in
