Home
Cart
Custom content
<p>This is custom content</p>

Home

Active filters

  • Brand: Suttner
  • Material: Brass
  • Material: Hardened Stainless Steel
  • Material: Plastic
  • Material: Stainless steel
  • Material: Zinc-plated steel
ST-60.1 Suttner foam injector with metering valve, suction hose and filter, couplings ST-45-250 KW
Suttner

ST-60.1 Suttner foam injector with metering...

$126.61
Availability: 1 In Stock

ST-60.1 Downstream Suttner foam injector with chemical metering valve, suction hose and ST-31 chemical strainer, quick couplings nickel/zinc plated brass ST-45-250 KEW, Nilfisk-Alto. Mixing of chemicals approx. 0-11.5%.Metering valve hose tail 1/4. Suction hose 39" long.Injector with dosage ST-61. Orifice size 1.6 mm.

Maximum pressure: 3625 psi
Minimum flow rate: 1.6 GPM
Maximum flow rate: 15.2 GPM
Temperature: 140°F
Housing: forged brass
Nozzle: Stainless steel
Input coupling: ST-45-250 KW
Output connector: ST-45-250 KW
Suction hose lenght: 39"

Foam Lance ST-72 (With Air Injector) YELLOW
Suttner

Foam Lance ST-72 (With Air Injector) YELLOW

$140.47
Availability: 1 In Stock

Suttner ST-72 Stainless Steel 24" FOAM LANCE, 2.9-3.96 GPM, 2.3 ORIFICE YELLOW COLLAR.

In conjunction with a spray gun and upstream or downstream injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction ideal for food grade applications.

FEATURES:

-Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream.

-Wet foam allows more efficient use of chemical

-More durable than conventional foamers

-Color orifice indicator on handle end

-A foam injector is required

SPECIFICATION:

-Orifice: 2.3 Yellow Dot

-Flow Rates: 2.90 to 3.96 GPM

-Input: 1/4" FPT

-Length: 24"

-Temperature: 300 F maximum, 41 F minimum

-Pressure: 900 PSI maximum

ST-49 Non-Rotating Sewer Cleaning Grease Ball Nozzle (Female 1/4 8x06R)
Suttner

ST-49 Non-Rotating Sewer Cleaning Grease Ball...

$55.22
Availability: 3 In Stock

ST-49 non-rotating sewer cleaning Grease ball nozzle. Female 1/4 8x06R. Ss hardened. Made in Germany

The Grease ball features 8 rear jets (0.6 mm) for extreme thrust and highest wall coverage of the pipe. Designed for the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes too. Completely spherical shape. Nozzle drilling as stepped bore for best protection against mechanical impact. Good for 2”-6” inch lines.

ST-49 Non-rotating Sewer Cleaning Root Ram Nozzle (Nozzle size 06, Female 1/4)
Suttner

ST-49 Non-rotating Sewer Cleaning Root Ram...

$69.55
Availability: 3 In Stock

ST-49 non- rotating sewer cleaning root ram nozzle. Nozzle size 06. Female 1/4. Material Ss hardened. Made in Germany

The Root ram is equipped with 3 rear jets (30°) for maximum thrust and 3 additional nozzles (45°) right behind its nose for better cleaning results and wall coverage. The nozzle has proven to be ideal on root chokes. Good for 2"-6" lines.

Pressure Switch ST-7.1 RED 362psi
Suttner

Pressure Switch ST-7.1 RED 362psi

$99.70
Availability: 3 In Stock

Suttner Pressure Switch ST-7.1 (RED-25 bar/362 psi) for Pressure Washer. Made in GERMANY

SPECIFICATION:

-Operating (start up) pressure: 25 bar/ 362 psi

-Rated pressure: 300bar/ 4350psi

-Rated temperature: 90C/ 194F

-Max Voltage: 250V

-Max Current strength: 10.1A

-Electrical Insulation rating: 65 IP

-Material: Brass

-Color: Black

-Inlet: 1/4” M

-Cable length: 950mm/ 37 Inches

ST-35 Water Intake Suction Foot Filter (Inlet 3/4" - 1", 19-25 mm, hose barb)
Suttner

ST-35 Water Intake Suction Foot Filter (Inlet...

$34.40
Availability: 1 In Stock

Water intake suction foot filter ST-35. High flow suction strainer ideal for tank transfer or agricultural markets. Made in Germany.

SPECIFICATION:

-Without Check valve

-Stainless steel spring and screen

-Inlet Stepped 3/4"-1”, 19-25 mm/ hose barb

-Corrosion-resistant heavy impact resistant plastic

-Max temperature: 140°F

-Compatible with all pressure washers

-Brass weighted to hold onto bottom of tank

ST-35 Water Intake Suction Foot Filter (Inlet 1/2" - 3/4", 13-19 mm, hose barb)
Suttner

ST-35 Water Intake Suction Foot Filter (Inlet...

$34.11
Availability: 1 In Stock

ST-35 Water intake suction foot filter. High flow suction strainer ideal for tank transfer or agricultural markets. Made in Germany.

SPECIFICATION:

-Without Check valve

-Stainless steel spring and screen

-Inlet Stepped 1/2" - 3/4"/13-19 mm/ hose barb

-Corrosion-resistant heavy impact resistant plastic

-Max temperature: 140°F

-Compatible with all pressure washers

-Brass weighted to hold onto bottom of tank

Suttner ST-2600 Pressure Washer Trigger Gun (1/4" F Outlet, 3/8" F Inlet)
  • -30%
Suttner

Suttner ST-2600 Pressure Washer Trigger Gun...

$51.73 $36.21 -30%
Availability: 3 In Stock

Suttner ST-2600 Pressure Washer Trigger Gun. Patented LTF technology. Inlet 3/8 F, Outlet 1/4 F

Professional, heavy duty, German made, Suttner ST-2600 with patented LTF technology (Low trigger force) pressure washer trigger gun. It comes with a 1/4” female outlet and 3/8 F inlet. Made in Germany.

Pressure Switch ST-7.1 BLACK 580psi
Suttner

Pressure Switch ST-7.1 BLACK 580psi

$103.07
Availability: 3 In Stock

Suttner Pressure Switch ST-7.1 BLACK 40 bar/580 psi for Pressure Washer. Made in GERMANY.

SPECIFICATION:

-Operating (start up) pressure: 40 bar/ 580 psi

-Rated pressure: 300bar/ 4350psi

-Rated temperature: 90C/ 194F

-Max Voltage: 250V

-Max Current strength: 10.1A

-Electrical Insulation rating: 65 IP

-Material: Brass

-Color: Black

-Inlet: 1/4” M

-Cable length: 950mm/ 37 Inches

Flow Switch ST-6
Suttner

Flow Switch ST-6

$55.25
Availability: 1 In Stock

Suttner ST-6 Flow Switch, All position (Horizontal or Vertical) Spring assisted brass magnet. Made in Germany

FEATURES:

-Horizontal or vertical mount

-Easy brass reed switch replacement.

SPECIFICATION:

-Max. Pressure: 5,070 PSI/350 bar.

-Min. Pressure: 75 PSI

-Max. Flow Rate: 8 GPM/ 30 ltr.

-Min. Flow Rate: 1 GPM

-Max Voltage: 250 V

-Max Current: 1 Amps

-Max: Fluid Temperature: 180° F/ 80 ° C

-Cable Length: 47.0 in/ 1200 mm.

-Inlet & Outlet: 3/8 MNPT

-Housing: Forged Brass

This website uses cookies to ensure you get the best experience on our website